WTB: Got a rotted LWB Bed you want to make a little on before it gets crushed? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

arkracing · 03-12-2007, 02:47 PM

I need a couple of patch panels for my bed

#1. Drivers Side bedside - 16" from the front of the bed side - I would like the inner and outer bedside as I want to drill out the spot welds on the front and bed rail to minimize the weld area on the actual sheet metal. Want to get rid of the crude Aux. Fuel door.

#2. Part of a section of a cross sill - as you can see from the picture it is the driver's side cross sill - second mounting cross sill from the front of the bed. I need a section from the outside to the mount hole, or a section of one that is the same length.

#3. I also need a section of floor about 16" x 16"

Can you help me out???!!!

Thanks,
Andy

03-12-2007, 02:47 PM	#1
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	WTB: Got a rotted LWB Bed you want to make a little on before it gets crushed? I need a couple of patch panels for my bed #1. Drivers Side bedside - 16" from the front of the bed side - I would like the inner and outer bedside as I want to drill out the spot welds on the front and bed rail to minimize the weld area on the actual sheet metal. Want to get rid of the crude Aux. Fuel door. #2. Part of a section of a cross sill - as you can see from the picture it is the driver's side cross sill - second mounting cross sill from the front of the bed. I need a section from the outside to the mount hole, or a section of one that is the same length. #3. I also need a section of floor about 16" x 16" Can you help me out???!!! Thanks, Andy __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered Last edited by arkracing; 03-12-2007 at 02:52 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.