Front Coli Springs....help!

[Draggn66]

I found where my front end is clunking everytime I flex the suspension. The drivers side coil spring is not centered in the holes and hits the upper control arm causing the clunk. The PO installed ECE's 2/4 drop and I don't know if it was in fact done correctly. Both springs end at different positions in the lower control arm. It doesn't look like there is any kind of stops to keep them from turning? Is something missing? I did a search but found no pics. Neither of my manuals give a good look at it either. The drivers side also sits about a inch lower in the front if that means anything. Any pics or info would help a lot! TIA.....

Damn...should have checked my spelin in the title!