Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-05-2007, 11:53 PM | #1 |
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
any interested in...........
have some 67-68 hoods, some 69-72 hoods and front bed panels for metal floor beds. They are piled up so if there is any interest I can pull them out and take pix.
I know there is at least one perfect of each mentioned above and the rest are in good shape with minor dents, ect. 69/71 SWB bed rough shape, metal floor straight but pitted with rust, front bed panel good shape, passenger side rust and damage, drivers side workable but not cherry, tailgate, it's there and closes, some chrome $100.........pick up only 3 front suspension crossmembers, 2 are 67-68 one is 69/71 $40 apiece plus.....shipping would be probably around 60-70 bucks 4speed with transfer case 3 speed with transfer case 4 M/T 15x8 classics 6 lugs one with very minor curb scape will polish out $250 plus shipping front and rear 71/72 1/2 4x4 axles 3:73 ratio, rear end housing rusted and no good but axles and gears are, front housing sitting outside, surface rust only complete with hubs and steering linkage both non-posi $250 no shipping 68 eaton coil 3/4 rear non-posi 4:56 ratio P/O said it has new wheel cyclinders and good drums, One of the trailing arm perches has the holes elongated by loose u bolts, I didn't take it apart $100 no shipping 68 1/2 4x4 burb........basically just the rolling frame, good shape no rust except surface with open knuckle front end, no idea of gear ratios ,with out adapted p/s box, has stripped and rusted burb body on it with good roof, uncut non a/c dash, good spare tire well, good cowl panel (the one welded to body) would like to make some room........but no hurry will email pix to interested people, if serious intent, don't have enough energy or time to move all the stuff to take pix for grins! Thanks, Steve Last edited by qksilver; 04-06-2007 at 08:05 AM. |
Bookmarks |
|
|