292 to 360 swap..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1969k10stepside · 04-08-2007, 03:09 PM

Ok,so my 71 4x4 was originally a 292 and now its getting a 360(Bored out 350).So,my question is.....is the crossmember mounted in the same spot as for a 292 or is the 292 mounting location different than one for a 350?I know the 6 cylinders used a different crossmember than one for a V8 but I dont know if the crossmember mounts in the same spot...I already changed to a V8 crossmember so I dont need to worry about that problem.
Thanks in advance.

04-08-2007, 03:09 PM	#1
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	292 to 360 swap..... Ok,so my 71 4x4 was originally a 292 and now its getting a 360(Bored out 350).So,my question is.....is the crossmember mounted in the same spot as for a 292 or is the 292 mounting location different than one for a 350?I know the 6 cylinders used a different crossmember than one for a V8 but I dont know if the crossmember mounts in the same spot...I already changed to a V8 crossmember so I dont need to worry about that problem. Thanks in advance. Last edited by 1969k10stepside; 04-08-2007 at 03:11 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.