70 4X4 K10 LWB Frame (DFW) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WORNBRAKES · 04-11-2007, 10:14 PM

The frame has a lift kit installed but I can not verify how much. The frame section around the steering box has been reinforced and I can see that a crack was welded near one of the bolt holes.
The axles are 3.07 ratio open. I pulled the covers to look at them and found sludge in the rear and some water and sludge in the front. They have been sitting a while. The gears have some surface rust on them from the water but they are mashed well with no abnormal wear indications.

Asking $350.00 for frame and axles without my Blazers trailer tires and wheels.
Will part out if there is no interest in the complete frame.
Lift kit 125.00 plus shipping
Axles 75.00 each
Crossmembers 30.00 each............

Thanks

04-11-2007, 10:14 PM	#1
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	70 4X4 K10 LWB Frame (DFW) The frame has a lift kit installed but I can not verify how much. The frame section around the steering box has been reinforced and I can see that a crack was welded near one of the bolt holes. The axles are 3.07 ratio open. I pulled the covers to look at them and found sludge in the rear and some water and sludge in the front. They have been sitting a while. The gears have some surface rust on them from the water but they are mashed well with no abnormal wear indications. Asking $350.00 for frame and axles without my Blazers trailer tires and wheels. Will part out if there is no interest in the complete frame. Lift kit 125.00 plus shipping Axles 75.00 each Crossmembers 30.00 each............ Thanks Attached Images __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.