Getting ready for the Meet! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hilandr451 · 04-30-2007, 12:32 AM

I'm taking Monday off from work to finish her up!! Went to the Highland Games in Woodland Saturday had a great time, then went to bed early and got up Sunday to start back on the truck.

Got the new front seal and harmonic balancer in, adjusted the alt. bracket so the pulleys all line up, custom bent a new steel fuel line to fit the high-rise & the thermoquad, set the engine up on TDC and stabbed the distributor, valve covers installed, PCV and vacuum lines all fitted and last but not lease that silly little 1/16" tubing that goes to the factory oil gauge.

Got it stabbed back in the truck. Tomorrow, it's linkage, motor mounts, a couple of wires & hoses, drop the radiator in & we're ready for the muffler shop.

04-30-2007, 12:32 AM	#1
Hilandr451 Registered User Join Date: Oct 2005 Location: Houston Texas Posts: 316	Getting ready for the Meet! I'm taking Monday off from work to finish her up!! Went to the Highland Games in Woodland Saturday had a great time, then went to bed early and got up Sunday to start back on the truck. Got the new front seal and harmonic balancer in, adjusted the alt. bracket so the pulleys all line up, custom bent a new steel fuel line to fit the high-rise & the thermoquad, set the engine up on TDC and stabbed the distributor, valve covers installed, PCV and vacuum lines all fitted and last but not lease that silly little 1/16" tubing that goes to the factory oil gauge. Got it stabbed back in the truck. Tomorrow, it's linkage, motor mounts, a couple of wires & hoses, drop the radiator in & we're ready for the muffler shop. __________________ Greg Smith a.k.a. "The Highlander" 1966 C20 Custom Camper, 2017 Chevy Silverado 1500 Highlander's Project Pics Highlander's web site: www.6066ChevyTrucks.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.