Desktop Dyno Question

[wlee]

Could someone with Desktop Dyno please run this engine & give me an idea of it's horsepower? Thanks - Lee

1974 Small Block Chevrolet 350 C.I.D., 4 bolt main, cast #3970010, stamp #VO415TJB that’s been professionally re-manufactured.

Cylinders bored .020

Clevite .010 main bearings and .020 rod bearings.

New flat top .020 pistons, original rods tested & reused.

64cc double hump 327 Feulie heads, cast #3917291, 1.94 intakes and 1.5 exhaust valves
Triple ground with new brass guides, Z-28 springs and new valves magnafluxed & milled giving a 10.3 compression ratio.

Clevite 229-1713 Hydraulic lash performance camshaft with an advertised duration of 306 intake and exhaust, duration at .050, lift is 222, Valve lift is .447, cam lift is .298, lobe spread is 114

New Johnson HT 817R lifters

Black Moly Push Rods

Black Moly roller rockers 1.5 intake / 1.6 exhaust

Black moly push rod guide plates.

Melling M-55A high velocity Z-28 Oil pump

Melling Distributor drive shaft.

Cloyes double roller timing chain and gears

New Holley 650 CFM electric choke Quadrajet

GM Polished aluminum manifold, GM ID#458520.

New HEI ignition custom tailored for maximum performance.