New motor delivery delayed...

[QWYKTRUK]

I just heard from my engine builder that the Brodix aluminum block had some porosities that allowed 3 of the sleeves to move during the final hone. Brodix is sending a new block and sonic testing it beforehand.Its going to be at least another month before it gets shipped to me after the Dyno run. Here is a slideshow of the truck with an empty engine bay.
http://s153.photobucket.com/albums/s...1178039154.pbw


And a picture of the motor as it will look when it is assembled. I am changing the carbs to 850 Mighty Demons from Holleys.

The motor is a 427 cu. in . all alum. with 8-71 Blower Shop and Intercooler,Callies Magnum XL crank, raised cam /50mm roller cam bearing block ,custom oil pan and pick-up, billet oil pump- the list goes on and on.
aluminum C&A 6"rods, custom pistons, dual swap cam (new firing order-18726543) maxed out Brodix track 1 heads, chemical vapor deposition
coatings and some ceramic coatings as well.All internal parts and the block are cryo'ed. Supposed to come out at 1040 hp and 830 ft.lbs tq. We'll see!!