Texas...bed for sale...shaved, widened tubs, short fleet bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

superchevy · 06-04-2007, 07:23 PM

SOLD...SOLD...SOLD!
Thanks C10er!

Hi guys.
This is a '68 short bed, steel floor, that I had a professional bodyman shave all the stake holes and side markers, as well as widen the wheel tubs and floor by 3" for wider tires...very nicely done...looks factory. In addition, a new Mar-K front bed panel was installed. The bed sides on this bed were very good to begin with...no rust...I told the bodyman that I wanted it perfect, so he repaired a few dings, then blocked and primed the bedsides 4 times, then epoxy sealed, then threw on a coat of red paint as extra protection. The bed floor is very nice, but not perfect...there are a few shallow dents...very shallow...I was going to level it out with rhino-liner.

The body/metal work alone was $1000, not including cost of the bed, extra wheel tubs, and front bed panel. Just install and paint.

Price is $1200.
Pick up only.
Located in Austin, Texas.
Please respond in thread only.
Thanks, Casey

06-04-2007, 07:23 PM	#1
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Texas...bed for sale...shaved, widened tubs, short fleet bed SOLD...SOLD...SOLD! Thanks C10er! Hi guys. This is a '68 short bed, steel floor, that I had a professional bodyman shave all the stake holes and side markers, as well as widen the wheel tubs and floor by 3" for wider tires...very nicely done...looks factory. In addition, a new Mar-K front bed panel was installed. The bed sides on this bed were very good to begin with...no rust...I told the bodyman that I wanted it perfect, so he repaired a few dings, then blocked and primed the bedsides 4 times, then epoxy sealed, then threw on a coat of red paint as extra protection. The bed floor is very nice, but not perfect...there are a few shallow dents...very shallow...I was going to level it out with rhino-liner. The body/metal work alone was $1000, not including cost of the bed, extra wheel tubs, and front bed panel. Just install and paint. Price is $1200. Pick up only. Located in Austin, Texas. Please respond in thread only. Thanks, Casey Attached Images __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396 Last edited by superchevy; 06-06-2007 at 08:04 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.