The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-11-2002, 11:21 PM   #1
low 84
Registered User
 
low 84's Avatar
 
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
quick help! frontend problems

well my steering is screwing up big time. what happens is if i more than moderately push on the brakes or hit a bump going at higher speeds the whole front end starts to shimmy/shake back and forth. this is not just a little vibration its big time shake. i checked the steering out in the parking lot and discovered that the braket that holds the idler arm to the frame was loose causing the center link and the rest of the steering setup to be wobbely. i tightened that bracket up. i also noticed that the baljionts on the idler arm are completeley shot. like no greese and a ton of play in them. i'm going to the parts store to get a new idler arm tommorow and put it on in the parking lot.

what else should i check? could a warped rotor also be adding to the problem or is this more than likley all steering related? what other steering parts should i check and how do i check them, rather than just going out there and shoking the crap out of them by hand to feel any play?

thanks for any help, i have to fix this fast b/c i dirve the trcuk every day and it is very dangerous with the steering screwed up like this. i have to drive 3 hours to dallas next fri too and there is no way i'm taking this thing on the highway with this problem.
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works

'05 1500 Crew Cab

RIP
'84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker
'80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's
low 84 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:04 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com