![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Dec 2005
Location: Humble, Texas
Posts: 262
|
![]()
ok so i have my 72 and when i was driving the rubber brake line on my front right side going to my caliper burst and i lost my brakes. well i was able to stop down shifting and using the E-brake a little well i replaced the line and the little bleeder valves are so tight on the caliper i cant get them loose to bleed my lines well i was told to losen the line where the rubber hose goes into the brake line and i was actually able to get it to come out there but i still have no brakes i can pump it about 5 times and it will get harder and hold but still goes to the floor any ideas? i really need to get this fixed
also while im on the brake system i have never been able to get any fluid to go to my rear brakes any ideas on that would help to ![]()
__________________
Redneck Rampage 1972 Chevrolet C-10 LWB 350 1972 Chevrolet K-20 LWB 502 LiFtEd |
![]() |
![]() |
Bookmarks |
|
|