**SOLD*1969 GMC 1/2 Ton, 2wd, 5 bolt 5on5 axles, leaf rear Ring, Pinion, Posi Carrier

[WinDancer]

SOLD TO suville

I have completed the rear end swap in my truck. The swap was done to get longer legs on the highway, from a 3.73 to a 3.08.

Now for sale is the replaced Ring, Pinion and Posi Carrier. I had no trouble with this setup- ran quiet and smooth, no noise, no metal in the oil when removed.

*** I MAKE NO WARANTEE ABOUT WHAT THIS WILL FIT! ***

The bearing races are stamped:
Made in USA KX NDH LM603812

The pinion sleeve is unmarked

The pinion is stamped:
3884335
11:41
12 69 GM
The number 4 is marked in crayon or paint

The Ring / Pinion is stamped:
30060
188 or 881
A??A STE?L
ED
a circle with a cross inside and a 1
3817778
11:41
12 69 GM
4J
J B or 3 K


*** YOU are responsible for making sure this fits your truck! ***


I have seen several posts that say the 12 bolts are all the same inside. THIS IS NOT TRUE. I bought what was advertised as a 2.92 that would work in my truck. It did NOT. My understanding of the two ring/pinion sets that were/are in my truck is that the 3.08 and lower gears are a smaller size than the 3.73 and larger gears. The 2.92s ended up being 3.08 and required a new carrier ($450 from Randy's Ring and pinion). No bargain after paying $150 for the ones that don't fit.

*** YOU are responsible for making sure this fits your truck! ***


I will post pics in a couple of hours.

I am looking for $300 plus shipping estimated at $75 via UPS. As always if shipping is less overage will be refunded.

Will consider trade for Holley 4160 750 CFM vac second, w/electric choke in near-perfect condition
or
Holly Street Avenger 750 CFM, w/electric choke in near-perfect condition. Not interested in anything else.

All communication here in this thread please- NO PMs will be answered until after sale.


*** I MAKE NO WARANTEE ABOUT WHAT THIS WILL FIT! ***