My '77 Stepside

[CUBaseball]

After 6 months of summit orders and turning wrenches I finally finished my small block build and my got my truck running again. I’ll skip the BS and get straight to the good stuff.
4 Bolt Core
4.04” bore x 3.75” stroke
Blueprinted & Balanced rotating assembly
5.7 GM Heavy Beam Rods
KB Hypereutectic Flat Tops
Decked, Line Honed, Ect.
Should come in at 10.5 to 1 CR

Improved Vortec Heads
Z28 Springs & Retainers to allow .525” lift
Lunati Hydraulic Flat Tappet 268 Cam
Performer RPM Intake Manifold
1.5 to 1 Full Roller Rockers
Long Tube Headers w/ Duel 2.5" flowmaster exhaust.

B&M, 2400 stall, TQ
T350 w/ Shift Kit
4:11 (open ) Gears

Right now I have an Edelbrock 1406 on top which will be out as soon as I find the right Holley. I have been looking at the avenger 670, any other suggestions would be great.

I am not completly done with the project, still need to finsh bolting up trim and various other parts and it still needs a good tune when I find that Holley.

Pics: