Heartbroken - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70rs/ss · 08-12-2007, 02:23 AM

The tire guy could have bent the wheel if he used the tire machine with the screw in center that goes into the hub. The machine can catch the lip and bend the crap out of a steel wheel. I doubt anything a shipper could have done would bend the hub and the lip, not really possible unles the shipping box was destroyed. I am leaning on the tire guy, if it is only an once or two, bolt it on the back and move on, $98 is cheap for another.

08-12-2007, 02:23 AM	#26
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: Heartbroken The tire guy could have bent the wheel if he used the tire machine with the screw in center that goes into the hub. The machine can catch the lip and bend the crap out of a steel wheel. I doubt anything a shipper could have done would bend the hub and the lip, not really possible unles the shipping box was destroyed. I am leaning on the tire guy, if it is only an once or two, bolt it on the back and move on, $98 is cheap for another.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.