6 lug disc conversion trouble HELP!!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dave66! · 08-14-2007, 04:40 PM

Hello All
Im in the middle of a 6 lug drum to 6 lug disc conversion on a 70 pickup (my brothers)We used 73-87 upper and lower control arms with 1.25 caliper and spindles.to get 6 lug rotors we bought 9o 2wd rotors 6 lug(the 70 is 2wd)the rotors fit as well as everything else until time to install calipers.there is about 1/4 inch gap between the inboard pad and rotor.do i need the 1990 calipers as well?i was under the impression that 73-87 should work.Any help would be greatly appreciated its to hot to be fighting the job this close to the end.
Thanks Much Dave

08-14-2007, 04:40 PM	#1
Dave66! Registered User Join Date: Jan 2002 Location: holiday,il,usa Posts: 52	6 lug disc conversion trouble HELP!!!!!! Hello All Im in the middle of a 6 lug drum to 6 lug disc conversion on a 70 pickup (my brothers)We used 73-87 upper and lower control arms with 1.25 caliper and spindles.to get 6 lug rotors we bought 9o 2wd rotors 6 lug(the 70 is 2wd)the rotors fit as well as everything else until time to install calipers.there is about 1/4 inch gap between the inboard pad and rotor.do i need the 1990 calipers as well?i was under the impression that 73-87 should work.Any help would be greatly appreciated its to hot to be fighting the job this close to the end. Thanks Much Dave __________________ 1972BLAZER,1966C10SWB,1963NOVASS HOLIDAY,IL



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.