Project OverKill - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevyDude · 08-28-2007, 12:59 PM

A little more progress. With the frame now shortened, I had to soak the diff rear end U bolts in PB Blaster to get them to break free. Removed the rear end and front of trailing arms...now to break the springs free from the trailing arms....and then the frame and trailing arms are off to the SANDBLASTER!

I've got to re-build/convert the rear diff to 5 lug axels and I do have a Glock kit ready to go....so it may be that OverKill gets the rear disc kit before Lil' Red!

08-28-2007, 12:59 PM	#11
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Project OverKill A little more progress. With the frame now shortened, I had to soak the diff rear end U bolts in PB Blaster to get them to break free. Removed the rear end and front of trailing arms...now to break the springs free from the trailing arms....and then the frame and trailing arms are off to the SANDBLASTER! I've got to re-build/convert the rear diff to 5 lug axels and I do have a Glock kit ready to go....so it may be that OverKill gets the rear disc kit before Lil' Red! Attached Images __________________ Alex 1971 Lil' Red 350 SBC 700R4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.