|
05-11-2002, 11:22 PM
|
#1 |
|
Registered User
Join Date: Feb 2000
Location: Edmonton, Alberta, Canada
Posts: 599
|
Electric fans
while I was at the yard getting my driveshaft I also got a couple electric fans from a 90 chev lumina. They are about 13" across so they should just fit on my rad. I'm hopeing they provide enough air flow, they almost lift themselves up when I test them but I guess I'll find out when I get them hooked up. What I'm wondering is how to wire them up? can I get a thermo switch from a lumina and then a relay or....? I know some people have done this before, anyone have a wiring diagram from an aftermarket setup or something, this would be a great help, Thanks!
Jesse ------------------ Near Saskatoon, Saskatchewan, Canada. 67 c-10, Long fleet, Newly swapped front disks, 5 lug rear end, 327 v-8 with Vortech heads, edlbrock performer rpm air gap manifold, 1406 carb and comp XE 256 cam. Backed by a getrag 5 speed and 1 piece driveshaft. Finnally running, almost driving! www.geocities.com/chevy67jesse
__________________
Edmonton, Alberta, 67 c-10, Long fleet, front disks, 5 lug rear end, 327 with Vortechs, edlbrock manifold, comp cams XE 256, 600cfm carb. Backed by a getrag 5 speed and 1 piece driveshaft. 1993 Dihatsu Hijet Jumbo cab 4x4, currently converting to battery electric power. |
|
|
| Bookmarks |
|
|
Threaded Mode