New Tranny is in! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigRed · 12-30-2002, 10:28 AM

Well, after about 10 hours of work yesterday, the TH350 is in. Makes a big difference, especially when I don't have to powerbrake my truck in reverse to get it out of the driveway in the morning!

Thanks to Matthew (Matt67350) for all your help and for the tranny! The generosity and helpfulness of those on this board keeps rolling!! I wouldn't have been able to do it by myself. Hopefully I'm getting closer to that point though.

This is what had to be changed because of the change from TH400 to TH350. However, some of the parts were supplied by Matthew.

Driveshaft and yoke
Shift linkage
Detent cable, bracket, and carb linkage
Speedo cable
Crossmember moved forward
Tranny cooling lines adjusted

12-30-2002, 10:28 AM	#1
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	New Tranny is in! Well, after about 10 hours of work yesterday, the TH350 is in. Makes a big difference, especially when I don't have to powerbrake my truck in reverse to get it out of the driveway in the morning! Thanks to Matthew (Matt67350) for all your help and for the tranny! The generosity and helpfulness of those on this board keeps rolling!! I wouldn't have been able to do it by myself. Hopefully I'm getting closer to that point though. This is what had to be changed because of the change from TH400 to TH350. However, some of the parts were supplied by Matthew. Driveshaft and yoke Shift linkage Detent cable, bracket, and carb linkage Speedo cable Crossmember moved forward Tranny cooling lines adjusted __________________ Scott Shelbourne



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.