Another "Death Wobble" Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

johnnywagon · 10-04-2007, 05:43 PM

I know there have been many posts on this subject but I have a very specific question. I recently put a couple thick fender washers on top of the kingpin springs on my Dana 60 and it did make the death wobble better but its still there. My question is: I'm thinking of adding another washer or two, which add up to almost 1/2" of spacing. Think it will help or hinder? Has anyone had luck with simply rebuilding to top end only (spring & cone bushing). I'm trying to do this on the cheap before I can afford crossover steering.
Thanks, John

10-04-2007, 05:43 PM	#1
johnnywagon Sofa King. We, Todd, Ed. Join Date: Oct 2006 Location: Spokane, Wa. Posts: 631	Another "Death Wobble" Question I know there have been many posts on this subject but I have a very specific question. I recently put a couple thick fender washers on top of the kingpin springs on my Dana 60 and it did make the death wobble better but its still there. My question is: I'm thinking of adding another washer or two, which add up to almost 1/2" of spacing. Think it will help or hinder? Has anyone had luck with simply rebuilding to top end only (spring & cone bushing). I'm trying to do this on the cheap before I can afford crossover steering. Thanks, John __________________ ~John 71 Blazer One Ton 65 Chevelle Station Wagon x2 59 Belair 2 Door 71 Chevy Open Road Van RV www.myspace.com/johnnywagon



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.