New pics of the $350 Blazer

[1969k10stepside]

I had the blazer outside today and took a few pics....It started as a $350 blazer running,driving and the 4wd worked,and was mostly complete.The motor was a crate motor a few years back and has a edelbrock 650 and aluminum intake.Tranny is a stock TH350 and has the NP205 t-case.Stock axles with 3:73s and has a posi in the rear It has a B&M shifter on it now,but is going to be replaced with a stock setup once I get a set of 4wd linkages.It came with stock buckets in the front and rear seat with all the brackets.I put in a windshield frame and a windshield,put on a stock front bumper,did alot of body work,changed the hood and tailgate,and replaced drivers side door.I need to get the fender cups welded in,finish on the windshield frame,finish the rear floor,and primer and put on some cheap flat black paint..I am getting a better set of bumpers,I am also putting a 4" lift on it this winter and some 33s or 34s on rallys.The single wall top and hatch in ok shape was $200.I have about $650 in it now,ready for the road but not the best looking.Not to bad of a price,eh? It should be a good 4wd for the winter,and a fun one to cruise around in with the top off once it warms back up next year..Note the hood isn't closed all the way,so that is why there is a gap between the hood and fenders






What it looked like when I first got it....