![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
what do you guys think of this cam ?
heres my engine combo so far,
400 ,2 freeze plug block ,.040 over bore, studded out 400 stock crank, balanced rotating assy., new balencer 10-1 hyper pistons GM pink 5.7 rods w/ arp bolts,h/v oil pump & hi-cap. pan (7qt ) dart pro-1 aluminum heads (2.05x1.60 ) z-28 double springs, pocket ported & port matched, 200 cc,s intake ports offy intake with 3 rochester 2 bbl carbs mallory dual piont with 45,000 volt coil ( cauz thats what i prefer for simplisity& all that will fit with 3 duces ) vette 2 1/2" exh. manifolds, port matched to heads hi-volume alum water pump. now this cam i,am thinkin of useing what do you think ? engle# ep28/30-1-1 specs. valve lift in.520,ex.537 running duration in.294,ex.310 valve lash-hyd. overlap, intake open @20 deg. exh. closes @22 checked at lifter .050 , intake closes @48 , exh. opens @58 gross cam lift & duration @ .050 intake 347, 248dur. ---- exh. 358, 260 dur lobe centers 106 i know someone has to be better at selecting a cam than me so help as i know this is what makes it tick. i want a small lopy idle my gearing is built th 400 with 3.73 gears thanks bob
__________________
I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 10-30-2007 at 02:32 PM. |
![]() |
![]() |
Bookmarks |
|
|