sm465 and NP205 questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71 super · 10-31-2007, 06:24 PM

I just pulled 465/205 out of frame so that frame could be cleaned/blasted and painted. I pulled bell and trans/case as a complete unit and then broke them down out side the frame. There appears to be a gasket of some type between adapter and trans and another between adapter and t/case where can I find these new- previous owner used rtv. 2nd question - what is the easiest way to put these parts back in. I am buying a new motor and the clutch is goig to be replaced as well (frame off) but these things are heavy! Any advice is welcomed. Thanks 71 super- p.s. I am a 4x4 newby- everything previously has been 2wd.

10-31-2007, 06:24 PM	#1
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	sm465 and NP205 questions I just pulled 465/205 out of frame so that frame could be cleaned/blasted and painted. I pulled bell and trans/case as a complete unit and then broke them down out side the frame. There appears to be a gasket of some type between adapter and trans and another between adapter and t/case where can I find these new- previous owner used rtv. 2nd question - what is the easiest way to put these parts back in. I am buying a new motor and the clutch is goig to be replaced as well (frame off) but these things are heavy! Any advice is welcomed. Thanks 71 super- p.s. I am a 4x4 newby- everything previously has been 2wd. Last edited by 71 super; 10-31-2007 at 06:24 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.