Carrier Question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

westbrookw · 11-02-2007, 05:34 PM

I pulled cover off my 12 bolt to reseal and service it while I had it in the air. After I removed the cover to drain it, I had 3 shims fall out. So, I decided to remove the carrier. Now I can not figure out what kind of carrier it is and what type of clutches and retainer to replace in it. The retainer that came out is one weird looking set-up. Any info will be appriciated. The shims that fell out ended up being guide plates for the clutches. Thanks for the help. The odd ball shim came out of the rightside. Not sure what the deal is with it either.

Does anyone know what type of carrier this is? And what replacement clutches and retainers I could use?

11-02-2007, 05:34 PM	#1
westbrookw LET'S GO...MOUNTAINEERS Join Date: Oct 2007 Location: Williamstown, WV Posts: 339	Carrier Question. I pulled cover off my 12 bolt to reseal and service it while I had it in the air. After I removed the cover to drain it, I had 3 shims fall out. So, I decided to remove the carrier. Now I can not figure out what kind of carrier it is and what type of clutches and retainer to replace in it. The retainer that came out is one weird looking set-up. Any info will be appriciated. The shims that fell out ended up being guide plates for the clutches. Thanks for the help. The odd ball shim came out of the rightside. Not sure what the deal is with it either. Does anyone know what type of carrier this is? And what replacement clutches and retainers I could use? Attached Images Last edited by westbrookw; 11-03-2007 at 08:21 AM. Reason: Didn't post my question



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.