sand Bag'n - The 1947 - Present Chevrolet & GMC Truck Message Board Network

green724x4 · 11-09-2007, 09:37 PM

Ever since I installed my 4 inch suspension lift I have had a sag in my rear leaf springs. My truck was stored for 10 years with a heavy chain in the box. We rearched the springs before installing. I have been running 305x70R16 and I like the look of the smaller wheel well with that size of tire. I still kick myself for not going with 35"s. I was wondering if I could drop the front end to match the rear.
I am going to swap my sbc for a blown bbc 427. I would think that the bbc should drop the front end a little. Although there is like 6 leafs in the front and only 3 in the back.
Hear are my measurements to the top of the wheeel well.
FD 43.75
FP 43.75
RD 41.5
RP 42

11-09-2007, 09:37 PM	#1
green724x4 Registered User Join Date: Feb 2007 Location: MI Posts: 214	sand Bag'n Ever since I installed my 4 inch suspension lift I have had a sag in my rear leaf springs. My truck was stored for 10 years with a heavy chain in the box. We rearched the springs before installing. I have been running 305x70R16 and I like the look of the smaller wheel well with that size of tire. I still kick myself for not going with 35"s. I was wondering if I could drop the front end to match the rear. I am going to swap my sbc for a blown bbc 427. I would think that the bbc should drop the front end a little. Although there is like 6 leafs in the front and only 3 in the back. Hear are my measurements to the top of the wheeel well. FD 43.75 FP 43.75 RD 41.5 RP 42 Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.