Clutch help on a L6 3speed 78 model - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scottyd · 11-20-2007, 12:35 PM

Does any one have any pictures of the bell crank and linkage? I just bought this old beater and the pedal is real stiff. Looking at the linkage from the front of the engine bay, the rod going to the clutch fork is at an angle shooting to the left. To me it looks like the z bar is either the wrong one or maybe installed backwards? I think I can modify it to work better but if it is in fact the wrong one I'd rather just go to the junkyard and get the right one. Here are some pics. THANKS!

11-20-2007, 12:35 PM	#1
scottyd Registered User Join Date: Mar 2004 Location: waco tx Posts: 113	Clutch help on a L6 3speed 78 model Does any one have any pictures of the bell crank and linkage? I just bought this old beater and the pedal is real stiff. Looking at the linkage from the front of the engine bay, the rod going to the clutch fork is at an angle shooting to the left. To me it looks like the z bar is either the wrong one or maybe installed backwards? I think I can modify it to work better but if it is in fact the wrong one I'd rather just go to the junkyard and get the right one. Here are some pics. THANKS! __________________ 1962 chevy shortwide,bagged, notched and Zed frame,top chopped 3 1/2", sectioned 2" tubbed (31x18.5 mickey Ts),shaved,currently 51"s from ground to roof top!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.