Stance and Lowering Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MStokes · 01-07-2003, 03:59 PM

I am in the process of deciding how much I want to lower my 72 C10. I took measurements from the floor to the peak of each fender and came up with the following:

Right Front 32"
Left Front 33"

Right Rear 33 1/2"
Left Rear 34 5/8"

Basically the truck is sitting higher on the left side, both front and back. Would this be due to spring sag and age on the right side? Actually with just a driver sitting in the cab it might be pretty level.

If I went with new springs all around (4" drop in the rear and 2" in the front), would it set pretty level?

01-07-2003, 03:59 PM	#1
MStokes Registered User Join Date: Aug 2002 Location: Meridian, Idaho Posts: 164	Stance and Lowering Question I am in the process of deciding how much I want to lower my 72 C10. I took measurements from the floor to the peak of each fender and came up with the following: Right Front 32" Left Front 33" Right Rear 33 1/2" Left Rear 34 5/8" Basically the truck is sitting higher on the left side, both front and back. Would this be due to spring sag and age on the right side? Actually with just a driver sitting in the cab it might be pretty level. If I went with new springs all around (4" drop in the rear and 2" in the front), would it set pretty level? Attached Images __________________ 1972 C-10 LWB, 400/350, 2WD 1972 C-20 Custom Camper, 350/350, 4WD (Converted)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.