Door pillar issue. :( - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lyrikz · 12-21-2007, 06:53 PM

Ok, so i tacked in my floor a bit and i ran into a problem, and im fuggin STUMPED. Here are some pics, the first pic is how it fits on the back side. The rocker. ITs flush and tight. Now, over the front side, theres this huge gap. What the heck do i do there??? I doubt the cab pillar moved forward. I measured door gaps and they are the same.... Is it that the rocker panel just doesnt fit well??
HEres the pics. See, it fits flush in the rear like its supposed to.

Here its not at all. Theres that gap at the top of the rocker. When i put the cab support on below it, its sill .5 inch away... any suggestions? Need more pics??

12-21-2007, 06:53 PM	#1
lyrikz PITbut Join Date: Sep 2007 Location: monroe washington Posts: 3,052	Door pillar issue. :( Ok, so i tacked in my floor a bit and i ran into a problem, and im fuggin STUMPED. Here are some pics, the first pic is how it fits on the back side. The rocker. ITs flush and tight. Now, over the front side, theres this huge gap. What the heck do i do there??? I doubt the cab pillar moved forward. I measured door gaps and they are the same.... Is it that the rocker panel just doesnt fit well?? HEres the pics. See, it fits flush in the rear like its supposed to. Here its not at all. Theres that gap at the top of the rocker. When i put the cab support on below it, its sill .5 inch away... any suggestions? Need more pics??



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.