350 Chevy Short Block

[bighead]

This is a 350 I was building for my truck project. I'm going to go in a different direction with this project and would like to sell this engine. It's a 350 four bolt main block that was cleaned and bored .020 over. The stock rods were resized and fitted with aftermarket rod bolts and new Sealed Power hypereutetic pistons pressed on. The pistons have a small 1/8th inch dome that gives around 9.5-1 compression with open chamber heads and have new moly rings. The cast crank was turned .010 on the mains and .010 on the rods. The rod, main, and cam bearings are all new Clevites. There is a new Melling oil pump, pick up, pump shaft, and oil pan included all in there boxes. There is also a new Clevite brand camshaft with specs similar to a High Energy cam, a Cloyes timing set, and Sealed Power lifters. The unused but opened Felpro gasket set is also included. $1000, sorry can't ship this one.