Min Wheel Dia to clear discs and 2.5 spindles? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 01-08-2008, 10:31 AM

Going to the next phase with the '67. 2.5" Western spindles, bags and '69 discs up front. My current wheels, 8.5" (4" bs) w/275-60 15 tires, are too wide to clear the inside of the fender. I don't want to end up grinding the spindles like I did last time when I tried this with 15" wheels. Are 16" steel wheels going to clear the discs? I am trying to retain the old school (low cost) look so no 18-20's! I am thinking a 16 x 8 steel wheel with 4" bs and 225 tire...poverty look with some tire width. Any suggestions?

01-08-2008, 10:31 AM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Min Wheel Dia to clear discs and 2.5 spindles? Going to the next phase with the '67. 2.5" Western spindles, bags and '69 discs up front. My current wheels, 8.5" (4" bs) w/275-60 15 tires, are too wide to clear the inside of the fender. I don't want to end up grinding the spindles like I did last time when I tried this with 15" wheels. Are 16" steel wheels going to clear the discs? I am trying to retain the old school (low cost) look so no 18-20's! I am thinking a 16 x 8 steel wheel with 4" bs and 225 tire...poverty look with some tire width. Any suggestions? Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 01-08-2008 at 10:36 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.