While ripping apart the dash.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kixwy2 · 01-08-2008, 04:55 PM

...for the forth time this weekend, I discovered that the relay that controls the hazard lights is busted. Turn signals work just fine and at a good speed, but when I tested the hazard lights they sit there and do nothing, then rapid fire blink about 3x per second. Now what?

Anyone know how easy/hard this fix is? My hazards are on the steering column and for the most part it's in good shape. I checked the fuse and traced the wire into the steering column (when I couldn't see it anymore) and everything seemed to be ok...

Or do I just shine it because they DO actually work?

01-08-2008, 04:55 PM	#1
Kixwy2 Registered User Join Date: Dec 2007 Location: Central Coast, CA Posts: 177	While ripping apart the dash.. ...for the forth time this weekend, I discovered that the relay that controls the hazard lights is busted. Turn signals work just fine and at a good speed, but when I tested the hazard lights they sit there and do nothing, then rapid fire blink about 3x per second. Now what? Anyone know how easy/hard this fix is? My hazards are on the steering column and for the most part it's in good shape. I checked the fuse and traced the wire into the steering column (when I couldn't see it anymore) and everything seemed to be ok... Or do I just shine it because they DO actually work? __________________ 1974 GMC C-10; my new addiction 1998 4 Runner; daily driver



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.