![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
![]() Join Date: Aug 2006
Location: Atascadero, CA
Posts: 1,152
|
FS: Custom tube frame with a dropmember and air ride
Well i am finally selling my other frame. I need the money to finish my current frame and project. I was building this frame before i went out of town a little less than 1 year ago for work and after i got back i found a c5 drivetrain that i decided to put into my truck so i no longer needed this setup. I wanted to keep it but things have changed a little. Here is a run down on what is installed in the frame. Please email for any questions.
Custom built tube steel frame Porterbuilt dropmember with power rack and pinion Brand new cross drilled and sloted rotors with new calipers front and rear Air ride technologies strong arms Air ride technologies shockwaves for the front and rear 12 bolt rear end (not posi) Air ride technologies trianglated four link Cantilever rear suspension which gives you about 9-10" of lift Rotors have been redrilled to 5x4.75 bolt pattern for a wider wheels selection and more.... The frame was designed to have a 7" ride height. The dump height is right about 2-2 1/4" off the ground to the rockers. I designed it so if an airbag ever popped i wont drag the frame or rockers. I am only trying to get the money i have in the frame out so basically you are getting a custom frame for free! Please email me for any quesitons. PRICE is $7250 for a complete rollin chassis minus the wheels and tires The wheels and tires in the pics do not come with the frame.
__________________
(Project truck) 1970 C10 under complete transformation ![]() My current build thread http://67-72chevytrucks.com/vboard/s...d.php?t=212871 Other project: C5 corvette swap into 70 c10 http://67-72chevytrucks.com/vboard/s...=1#post2413517 On Hold |
![]() |
![]() |
Bookmarks |
|
|