|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
01-14-2008, 07:25 PM
|
#1 |
|
Saving 1 truck at a time!
Join Date: Aug 2001
Location: Kent, WA
Posts: 6,465
|
'68 Caps...ALWAYS look at the back!
It is more important than the front of the cap!!! These are examples of '68 polished stainless caps available in '68. They are indentical in outer appearance and all 10.5-in diameter caps that are about 2.625-in. tall. These are 2x4 caps...I do not believe that they will fit the 4x4 trucks but have not checked.
The far left is a 1/2 ton cap that fits over the nubs...it might even fit over the nubs on a later model 3/4 wheel but I have not checked that. The center cap is a 1/2 ton "clip" style cap for wheels with the clips. It measures 8.0 inches to the outside of the inner ring. The far right is a cap for a 3/4 or 1 ton clip style wheel. It measures 9.25 to the outside of the inner ring.
__________________
'68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 01-14-2008 at 07:26 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode