'67 drum to '72 disc swap - advice?

[Truckstr]

I'm about to embark on a new project and would appreciate any advice from the old hands here. Experience is the best teacher, so I want to learn from those with it.

Here's what I have:

'67 Chevy swb with drums on all four wheels to change to power disc.

'72 Chevy lwb with power front disc as a donor truck.

ECE drop spindles
new '72 power disc brake master cylinder
new front end rebuild kit for the '72 (procured before I had the '67) - ball joints, tie rod ends, etc.
ECE front anti-sway bar with drop brackets.

I plan on installing the rear end from the '72 later to get it to 5-lug all around.

What will I need, besides what I have, to get before I starting? New front brake hoses will be one thing on the list. What else?

I want to have the '67 down for as little time as possible. I can even take the complete cross-member assembly out from under the '72 and rebuild it, I suppose. That would mean that I'd need to pull the engine in the '67 to ease installation. Right?

Again, any advice before I get started (and after) will be appreciated. I'll try to take pictures as I go if I can swipe the digi-cam from work.

Thanks,
Jeff