WTB-Engine stuff

[D.PASSMORE]

I have 71 SWB 4x4 with a 454 CID squeezed between the rails, I’m going to change it back to a standard ‘71 – 350 CID, 4x4 setup. So, I’m looking for the following items:
1. Spark plug shields.
2. Little spark plug wire holders tabs that bolt to the oil pan and the ones that fit on the back of the motor and by the distributer.
3. Timing chain cover, timing tab and hardware for a 72 truck, 350 CID.
4. Valve cover set, 68-72 truck, Passenger side, standard / drivers side, big hole in rear for oil filler tube/front-pcv valve.
5. Also, a cap/plug that goes into the top of an oil filler tube. Dog chewed mine up…
6. Two belt, crankshaft/harmonic balancer pulley with bolts/ 2 belt water pump pully
7. Flywheel with bolts
8. 4x4 dipstick and tube
9. Any hardware, too.
I know some of this stuff is take –off time consuming with a low payback, but thanks for thinking about it, nothing really survives to long in Florida junkyards.