Eaton rear.....obsolete Junk! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Old Chevy Mech · 01-29-2008, 08:19 AM

I rebuilt the brakes on my eaton, new shoes-drums-wheel cylinders-auto adjusters-bearings-lug studs & E Brake cables. Drums were brand new and cost @ $230 IIRC. The only advice I would ever give is dont go to an autoparts store for the bearings unless you know them and they give you a good deal. Go to a bearing supplier you'll save about $100. The Ebrake cable replacement was a little tricky. I would up modifying the new cable a little and using the original mounting brackets so they bolted in the same way. It was worth it IMHO because its back to original...the first original lasted 37 years.........

Frank

01-29-2008, 08:19 AM	#24
Old Chevy Mech Keepin it runnin! Join Date: Oct 2007 Location: Deep River, CT Posts: 1,036	Re: Eaton rear.....obsolete Junk! I rebuilt the brakes on my eaton, new shoes-drums-wheel cylinders-auto adjusters-bearings-lug studs & E Brake cables. Drums were brand new and cost @ $230 IIRC. The only advice I would ever give is dont go to an autoparts store for the bearings unless you know them and they give you a good deal. Go to a bearing supplier you'll save about $100. The Ebrake cable replacement was a little tricky. I would up modifying the new cable a little and using the original mounting brackets so they bolted in the same way. It was worth it IMHO because its back to original...the first original lasted 37 years......... Frank __________________ 1970 K-5 4X4 Blazer 1970 K-20 4X4 Long Bed "Liberty Means Responsibility, that is why most men dread it"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.