|
01-31-2008, 01:16 PM
|
#1 |
|
Retired Air Force Veteran
 
Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
Cross Member Help
I need the location of the rear shock cross member (Pics would help also)
I am converting from leafs to trailing arms and I have removed the upper shock brackets from the frame and want to make a cross member out of 2x2 box steel so I can relocate the upper shock mounts. Are the same holes used on the top part of the frame? How far from the frame are the upper shock brackets. I know the bottom hole is for the coil spring. Hope this is not to confusing. Any help would be greatly appreciated.
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop  Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors |
|
|
| Bookmarks |
|
|
Threaded Mode