|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
02-13-2008, 07:13 AM
|
#1 |
|
Registered User
Join Date: Sep 2005
Location: Smith Mountain Lake Virginia
Posts: 1,537
|
How I redid my harness and a few pics
In case you haven’t thought about your trucks wiring – you should. I almost lost my truck a little over a week ago because I too thought THOUGHT all was good. Anywho, figuring it was about $350 or so for a new under dash harness and the fact that I’m cheap, I decided to redo my harness – and get more familiar with my trucks systems.
I started at the fuse box and replaced all the wiring, pulled the fuse box apart and cleaned all the parts, put in PROPER rated fuses and then reassembled. For those with a little ability (soldering and staying organized) it’s not too daunting. This is only what I did and this information might help someone who only needs to make a repair. Notice the one fuse holder connector on the left - it's been cleaned up. Looks nice no?
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew! Last edited by Luvlegs; 02-13-2008 at 07:27 AM. |
|
|
| Bookmarks |
|
|
Threaded Mode