question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Flyin Sparkplug · 02-25-2008, 04:49 AM

I have made the desicion to drop my '76 Scottsdale with 2" coils and 2.5" spindles in the front and a flip kit and c-notch kit in the rear. If i am reading correctly, this should give me about a 4.5/6 drop, but i am questioning the rear drop due to the 1 ton leafs(9-leafs). I was wondering if any one has done a drop like this with these leafs and how it turned out. Also, in the front, will i have any rubbing issues with the setup i am lookin at? (will probably use all LMC parts, unless there is cheaper/better parts you all know of)
Thanks as always

02-25-2008, 04:49 AM	#1
Flyin Sparkplug Registered User Join Date: Feb 2008 Location: West Virginia Posts: 42	question I have made the desicion to drop my '76 Scottsdale with 2" coils and 2.5" spindles in the front and a flip kit and c-notch kit in the rear. If i am reading correctly, this should give me about a 4.5/6 drop, but i am questioning the rear drop due to the 1 ton leafs(9-leafs). I was wondering if any one has done a drop like this with these leafs and how it turned out. Also, in the front, will i have any rubbing issues with the setup i am lookin at? (will probably use all LMC parts, unless there is cheaper/better parts you all know of) Thanks as always __________________ -Flyin Sparkplug -1976 Scottsdale Camper Special "To be old and wise, you must first be young and stupid"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.