Moving Colum Update - The 1947 - Present Chevrolet & GMC Truck Message Board Network

eightbanger · 02-26-2008, 05:23 AM

Well just to let all those know who helped me with my question about moving the colum down a few inches, I did it today and it was an all day job as I thought, it did go wrong at one point when my drill bit snapped off in the hole while drilling out the pins, so had to remove the entire colum to do this thing, one good thing was that I really did not want my NSS outside the firewall so I moved it up the colum further just cut another slot for it but had to fabricate a small spline for the switch to lock on to to operate the switch.

So I had my beer 72 SWB in my new roomier cab.

Thanks Guys.

02-26-2008, 05:23 AM	#1
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Moving Colum Update Well just to let all those know who helped me with my question about moving the colum down a few inches, I did it today and it was an all day job as I thought, it did go wrong at one point when my drill bit snapped off in the hole while drilling out the pins, so had to remove the entire colum to do this thing, one good thing was that I really did not want my NSS outside the firewall so I moved it up the colum further just cut another slot for it but had to fabricate a small spline for the switch to lock on to to operate the switch. So I had my beer 72 SWB in my new roomier cab. Thanks Guys. __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.