New Member from Iowa

[bondski06]

Hey I'm bondski06 from Iowa and my project/daily driver is a 1968 Chevrolet C-10 Custom with a 292 inline six hitched to a three-on-the-tree with farm gears in the back. She was special ordered from the factory with that engine, trans, and rearend-along with the swing-arm and 3/4 ton coil springs in the back(found that out the hard way when I went to replace both of them and got the 1/2 ton springs instead) I have a grille guard and new paint that will go on it in the summer and new rims and tires on the way. The 292 gets an overhaul this summer with high-dome pistons, a more aggressive cam, a new intake and race carb, split headers that will run back and exit through two stacks on the driver's side of the cab.