Return Line Through Fuel Gauge Unit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Zonaman · 03-14-2008, 11:05 PM

It seems to me, I read about someone who used the vapor line fitting on the fuel sending unit for a retun line on a TBI conversion. Right now, I have a '69 with the single feed line fitting on the fuel level float unit. I need to replace that unit and was thinking of getting one for the later models that have the vapor line fitting.

I'm not doing a TBI conversion right now, but since I'm looking ahead to when I do so I'd need to just cap off the line for a time. Any problems there?

Thanks.

03-14-2008, 11:05 PM	#1
Zonaman Registered User Join Date: May 2004 Location: Chandler, AZ Posts: 519	Return Line Through Fuel Gauge Unit? It seems to me, I read about someone who used the vapor line fitting on the fuel sending unit for a retun line on a TBI conversion. Right now, I have a '69 with the single feed line fitting on the fuel level float unit. I need to replace that unit and was thinking of getting one for the later models that have the vapor line fitting. I'm not doing a TBI conversion right now, but since I'm looking ahead to when I do so I'd need to just cap off the line for a time. Any problems there? Thanks. __________________ 69 C-10 LWB, 350, 700r4, 3.73 posi-traction, front disc brakes. Built for the desert- She can take the heat! Vivat Rex Chevus!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.