s10 chassis idea - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mwipp · 04-01-2008, 06:27 AM

i wanted to upgrade the suspension, and my day had the idea of mounting it on an s10 chassis. the width is nearly the same the s10 is an inch or two wider. the liength of the s10 is about 4 inch longer and will need to be shortened. i thought it was a good idea because you get newer suspension, in frame gas tank, power steering, and five lug. the chassis doesn't bump up for the box like the c10 but that canbe spaced out. well the reason im posting is to see if anyone has done this or seen it. the other idea we had was to weld the front suspension of an s10 to the back of the c10 chassis. if you've done this could ya expain what ya did
thanks
mwipp

04-01-2008, 06:27 AM	#1
mwipp Registered User Join Date: Nov 2007 Location: verona, WI Posts: 123	s10 chassis idea i wanted to upgrade the suspension, and my day had the idea of mounting it on an s10 chassis. the width is nearly the same the s10 is an inch or two wider. the liength of the s10 is about 4 inch longer and will need to be shortened. i thought it was a good idea because you get newer suspension, in frame gas tank, power steering, and five lug. the chassis doesn't bump up for the box like the c10 but that canbe spaced out. well the reason im posting is to see if anyone has done this or seen it. the other idea we had was to weld the front suspension of an s10 to the back of the c10 chassis. if you've done this could ya expain what ya did thanks mwipp



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.