My new '70 K10 - $ for body work? PICS! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 04-03-2008, 10:36 PM

If you do all the grunt work (disassembly) it will be much cheaper. I did kick panels, partial floor, rockers cab corners and some pillar work for $1000. The guy delivered the truck and patch panels. It had the doors and front clip held on by two bolts each. I finished it with DP90, aligned the doors and front clip when I was done to make sure it was a good fit.

There are some craftsmen around that will work parttime/evenings in your shop too. You just have to look around and check out their work.

04-03-2008, 10:36 PM	#23
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: My new '70 K10 - $ for body work? PICS! If you do all the grunt work (disassembly) it will be much cheaper. I did kick panels, partial floor, rockers cab corners and some pillar work for $1000. The guy delivered the truck and patch panels. It had the doors and front clip held on by two bolts each. I finished it with DP90, aligned the doors and front clip when I was done to make sure it was a good fit. There are some craftsmen around that will work parttime/evenings in your shop too. You just have to look around and check out their work. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 04-03-2008 at 10:40 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.