Door Weatherstrip - The 1947 - Present Chevrolet & GMC Truck Message Board Network

S10Fan · 04-17-2008, 03:12 AM

I changed out the rusted, no, make that really rusted doors on my 80 this weekend with doors from an 85 Blazer. The gaps still need a little work but they’re pretty close. I can’t seem to get the top of the door close though. I tried pulling the window frame in but a large gap remains. Yes, I do need new weatherstrip but new stuff isn’t going to close this one up.

While looking at the LMC catalog I noticed another piece of weatherstrip that goes on the door in addition to the strip for the cab opening. See number 2 in the attached picture. I don’t recall this part being on any of the trucks I previously owned.

Any input?

Thanks!

Bryan

04-17-2008, 03:12 AM	#1
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Door Weatherstrip I changed out the rusted, no, make that really rusted doors on my 80 this weekend with doors from an 85 Blazer. The gaps still need a little work but they’re pretty close. I can’t seem to get the top of the door close though. I tried pulling the window frame in but a large gap remains. Yes, I do need new weatherstrip but new stuff isn’t going to close this one up. While looking at the LMC catalog I noticed another piece of weatherstrip that goes on the door in addition to the strip for the cab opening. See number 2 in the attached picture. I don’t recall this part being on any of the trucks I previously owned. Any input? Thanks! Bryan Attached Images __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.