Hey guys I need some help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rokcrln · 04-19-2008, 05:01 AM

Yep I need a hand figuring out what H2o temp sender to use in LowBuck.
You see I want to use the stock dash gauge but the stock sending unit is like a 1/2 NPT and my 92 LT1 only has a 3/8NPT spot in the head. I have already re-wired the fire wall bulk head and hooked the wire up to a sender I had found but it reads way off. The parts store can't tell me what Ohms the gauge or sender is stock so I have no way of finding a cross over sender for my application. Does any one have a part number for the correct sender but in a 3/8NPT size?

Tell you what the first person who can give me the right part number that works corectly I will send out a set of ether cab dolly or cab lift plans for your help!

Kevin
LFD Inc.

04-19-2008, 05:01 AM	#1
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Hey guys I need some help! Yep I need a hand figuring out what H2o temp sender to use in LowBuck. You see I want to use the stock dash gauge but the stock sending unit is like a 1/2 NPT and my 92 LT1 only has a 3/8NPT spot in the head. I have already re-wired the fire wall bulk head and hooked the wire up to a sender I had found but it reads way off. The parts store can't tell me what Ohms the gauge or sender is stock so I have no way of finding a cross over sender for my application. Does any one have a part number for the correct sender but in a 3/8NPT size? Tell you what the first person who can give me the right part number that works corectly I will send out a set of ether cab dolly or cab lift plans for your help! Kevin LFD Inc.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.