Holley to Edelbrock Swap Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevyholic · 05-11-2008, 05:35 PM

Hey guys,

I finally got fed up with my Holley Street Avenger and purchased an Edelbrock 1406. It is running awesome, but have a question for those who might be running a similar setup.

On the Edelbrock DVD it shows them putting the return spring where my kick-down cable mounts. I'm running an Edelbrock performer RPM intake and am having trouble finding a spot to locate the return spring off of the front side of the throttle linkage. Does anyone have any ideas, or pictures of this kind of setup. I have to assume that anyone would run into this problem that was running the Edelbrock with an automatic transmission.

Any ideas?

05-11-2008, 05:35 PM	#1
Chevyholic Will it run today? Join Date: Feb 2007 Location: DFW, Texas Posts: 272	Holley to Edelbrock Swap Question Hey guys, I finally got fed up with my Holley Street Avenger and purchased an Edelbrock 1406. It is running awesome, but have a question for those who might be running a similar setup. On the Edelbrock DVD it shows them putting the return spring where my kick-down cable mounts. I'm running an Edelbrock performer RPM intake and am having trouble finding a spot to locate the return spring off of the front side of the throttle linkage. Does anyone have any ideas, or pictures of this kind of setup. I have to assume that anyone would run into this problem that was running the Edelbrock with an automatic transmission. Any ideas? __________________ Jaws, the 1971 Chevy Cheyenne Longbed. She's big, grey, and has an insatiable appetite!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.