Hey BBC gurus I have a Air Gap question?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

87Lowrider · 05-15-2008, 09:25 PM

I have a brand new EDL-1407 with the Air-Gap Performer RPM intake installed on my 454. I called summit today to get a throttle bracket / kickdown bracket. they told me that the Air-Gap didn't have direct support for mounting the bracket and that I'd have to use a universal one that mounts to the back left carb stud (which I have).

Problem is, when I mount it, it's too far forward for the kickdown cable to hook up without extending it all the way forward. Then, there's no travel left to go to WOT.

Thoughts / suggestions?

Thanks!

Kenny

05-15-2008, 09:25 PM	#1
87Lowrider Navy Radioman Veteran Join Date: Jul 2007 Location: Western Kentucky Posts: 1,350	Hey BBC gurus I have a Air Gap question?? I have a brand new EDL-1407 with the Air-Gap Performer RPM intake installed on my 454. I called summit today to get a throttle bracket / kickdown bracket. they told me that the Air-Gap didn't have direct support for mounting the bracket and that I'd have to use a universal one that mounts to the back left carb stud (which I have). Problem is, when I mount it, it's too far forward for the kickdown cable to hook up without extending it all the way forward. Then, there's no travel left to go to WOT. Thoughts / suggestions? Thanks! Kenny __________________ 1987 Chevrolet R10 Silverado BBC Build thread - SOLD 1986 GMC Sierra Classic - SOLD 1957 Chevy Step Side - At the Body Shop Daily Driver; 2005 Chevrolet Silverado 4x4 Z71 Stepside



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.