05-29-2008, 04:18 AM | #1 |
Navy Radioman Veteran
Join Date: Jul 2007
Location: Western Kentucky
Posts: 1,356
|
*****************
I read a thread recently here where someone was recommending *****************'s brackets and bags for the front of 73-87's.
Over this past weekend, I pulled out the springs that had 1 1/2 coils removed from them and replaced them with the stock ones that I received when I bought the truck from the previous owner last summer. The nice thing was that the cut springs dropped the front to a level I really liked except when I turned a corner. With the well tops cut out by the previous owner, it did pretty good but once I put the 454 in, I also put in new wells so I had to raise it up a couple inches so it won't rub under normal conditions, so bags seem like the best option. Problem is, the stock springs raised it nearly 5 inches in the front which puts it higher in the front than the rear. What to do??? thanks for your input... Kenny
__________________
1987 Chevrolet R10 Silverado BBC Build thread - SOLD 1986 GMC Sierra Classic - SOLD 1957 Chevy Step Side Daily Driver; 2005 Chevrolet Silverado 4x4 Z71 Stepside - SOLD 2005 Chevrolet Tahoe Z71 |
Bookmarks |
|
|