Removing 3 inch body lift. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frosty · 05-30-2008, 11:45 PM

I am removing the 3 inch body lift from the GMC. I need to know the blot size and length of bolts I need to put it back to the frame. Also is there any kind of rubber that should go in between or is it just metal to metal?
Thanks again for being my go to guys!
Frosty

(long part of the story) The previous owners didn't do it right so I'm trying to fix it and make this truck right. I guess they put on a suburban kit on the truck. So I have rubber pucks holding the bed up instead of blocks. It will still have the 4 inch suspension lift and will have to do something about tire rub but I put an end to the body roll.

05-30-2008, 11:45 PM	#1
Frosty Under desk Join Date: Feb 2008 Location: Castle Rock, Colorado Posts: 64	Removing 3 inch body lift. I am removing the 3 inch body lift from the GMC. I need to know the blot size and length of bolts I need to put it back to the frame. Also is there any kind of rubber that should go in between or is it just metal to metal? Thanks again for being my go to guys! Frosty (long part of the story) The previous owners didn't do it right so I'm trying to fix it and make this truck right. I guess they put on a suburban kit on the truck. So I have rubber pucks holding the bed up instead of blocks. It will still have the 4 inch suspension lift and will have to do something about tire rub but I put an end to the body roll. __________________ Frosty Smith 1979 GMC 1/2 ton 2wd diesel that now has a 1976 Firebird V8 engine and is a 4X4 with a 7inch lift. The real question is would I have still bought it if I had known all this...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.