Thinking about a Mcgaughy's brake setup suggestions or opinions welcomed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jjg · 02-02-2003, 05:11 PM

Hey guys i have 67 chevy with 6 bolt all the way around, and have seen McGaughys advertised and they seem pretty reasonable.

6 Lug Rotor kit includes:
12" rotors, calipers, Bearings, seals, hoses, dust caps, and spindle nut. $219.00 for the kit
Also i know i am going to need the spindles and they sell a 2 1/2 inch drop spindle for 229.00 a pair, or the stock spindles for the same price. Basically the truck is going to be used for hauling the occasional vehicle but nothing to bad. So have you guys heard good or bad things about these McGaughys setups.. Anything else i am going to need for this swap. I know i am going to have to a new master cylinder and proportioning valve for the swap.. What else will i need to do to make this swap a success.
thanks
John

02-02-2003, 05:11 PM	#1
jjg Registered User Join Date: Mar 2000 Location: elk horn, ia, USA Posts: 554	Thinking about a Mcgaughy's brake setup suggestions or opinions welcomed Hey guys i have 67 chevy with 6 bolt all the way around, and have seen McGaughys advertised and they seem pretty reasonable. 6 Lug Rotor kit includes: 12" rotors, calipers, Bearings, seals, hoses, dust caps, and spindle nut. $219.00 for the kit Also i know i am going to need the spindles and they sell a 2 1/2 inch drop spindle for 229.00 a pair, or the stock spindles for the same price. Basically the truck is going to be used for hauling the occasional vehicle but nothing to bad. So have you guys heard good or bad things about these McGaughys setups.. Anything else i am going to need for this swap. I know i am going to have to a new master cylinder and proportioning valve for the swap.. What else will i need to do to make this swap a success. thanks John



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.